Thin Repairs with Vinyl Concrete

Pakmix Vinyl Concrete is a premium, two part patching material consisting of Portland Cement, graded sand, and a liquid bonding agent. It's ideal for patching and resurfacing small or large concrete surfaces.

Tools Needed For Project:

Step #1:

Clean the area thoroughly, using a brush or a broom. Dampen the existing concrete surfaces completely and then remove standing water.

Step #2:

Now, mix the Pakmix Vinyl Concrete Instead of water, use the additive provided in each bucket. Thoroughly mix the additive and the cement together and allow it to set 2 to 3 minutes. Remix and apply to the area.

Step #3:

Take special care working the latex cement into the existing concrete, making sure to feather out to the existing concrete surface.

Step #4:

To make sure your repaired area cures correctly, keep it moist with a fine mist from your garden hose, then cover with opaque plastic or burlap. Repeat this process 2-3 times a day for 3 days.

Suggested Uses:

Packaging & Yields:

One (1) pound covers approximately 3/4 sq. ft. 1/8" thick. Packaged in 10 lb. plastic containers.

Please Read The Warning On All Packaging