Pakmix, Inc.

Pakmix, Inc.

Contact Us

327 North 19th Street

Middlesboro, KY 40965

800.272.5649

Repairs with Vinyl Concrete

Pakmix® Vinyl Concrete is specially designed for patching and resurfacing a variety of concrete and masonry surfaces. It can be applied indoors or outdoors and troweled on horizontal or vertical surfaces.

Tools Needed for Project:

  • Wheelbarrow or mortar box
  • Trowel and/or float
  • Hoe
  • Curing cover
  • Brush for cleaning

Step #1:

Clean the area thoroughly, using a brush or a broom. Dampen the existing concrete surfaces completely and then remove standing water.

 

Step #2:

Pour dry Pakmix® Vinyl Concrete Mix into a wheelbarrow and form a crater with a hoe. Next, pour clean water into the crater and mix. Allow the mix to stand for 2 to 3 minutes, then remix thoroughly.

 

Step #3:

Then apply Pakmix® Vinyl Concrete to the repair area. Work the Vinyl Concrete down into the crevices and smooth out with a trowel. Take special care in feather-edging the material with the existing concrete surface.

 

Step #4:

To make sure your repaired area cures correctly, keep it moist with a fine mist from your garden hose, then cover with opaque plastic or burlap. Repeat this process 2-3 times a day for 3 days.

 

Suggested Uses:

  • Patch or resurface worn, pitted walks and driveways
  • Repair crumbling or deteriorated mortar joints
  • Patch and repair stucco surfaces

Packaging & Yields:

One (1) pound covers approximately 1/2 sq. ft. 1/4″ thick. A 40 lb. bag will cover approximately 18 sq. ft. 1/4″ thick or 1/3 cu. ft. wet volume. Packaged in 10 lb. plastic pails and 40 lb. polylined bags.

Please Read the Instructions and Warnings on all Packaging