Making A Deep Repair

Pakmix® Sand Mix is a specially formulated blend of Portland cement and sand, ideal for use where a thickness of 1/2″ to 2″ is required. It is perfect for repairing damaged walkways and slabs.

• Wheelbarrow or mortar box
• Trowel and/or float
• Hoe
• Curing cover
• Brush for cleaning
• Hammer and chisel
• Safety glasses or goggles

Step #1:

Use a hammer and chisel to square the edges of the area to be patched. Then thoroughly clean the area of any loose concrete, using a stiff brush or broom.



Step #2:

Pour Pakmix® Sand Mix into a wheelbarrow and form a crater with a hoe. Pour clean water into the crater and mix to a smooth consistency. For improved bonding and strength, mix with Pakmix® Cement Fortifier instead of water.

Step #3:

Apply the Sand Mix to the problem area. Work the material down into the crevices and smooth out with a trowel. Take special care to place Sand Mix level with old concrete.



Step #4:

To make sure your repaired area cures properly, keep area moist with a fine mist from your garden hose, then cover with opaque plastic or burlap. Repeat this process 2-3 times a day for 3 days.

Suggested Uses:

• Concrete floor topping
• Filling cracks
• Repairing walls
• Repairing floors
• Grouting
• Filling tree cavities
• Laying flagstones
• Paving brick

Packaging & Yields:

80lb. bag yields approximately 8 sq. ft. 1″ thick or approximately 2/3 cu. ft. wet volume.
60lb. bag yields approximately 6 sq. ft. 1″ thick  or approximately 1/2 cu. ft. wet volume.
50lb. bag yields approximately 5 sq. ft. 1″ thick or approximately 4/10 cu. ft. wet volume.
40lb. bag yields approximately 4 sq. ft. 1″ thick or approximately 1/3 cu. ft. wet volume.

Please Read the Instructions and Warnings on all Packaging