Repairs with Vinyl Concrete

Pakmix Vinyl Concrete is specially designed for patching and resurfacing a variety of concrete and masonry surfaces. It can be applied indoors or outdoors and troweled on horizontal or vertical surfaces.

Tools Needed For Project:

Step #1:

Clean the area thoroughly, using a brush or a broom. Dampen the existing concrete surfaces completely and then remove standing water.

Step #2:

Pour dry Pakmix Vinyl Concrete Mix into a wheelbarrow and form a crater with a hoe. Next, pour clean water into the crater and mix. Allow the mix to stand for 2 to 3 minutes, then remix thoroughly.

Step #3:

Then apply Pakmix Vinyl Concrete to the repair area. Work the vinyl concrete down into the crevices and smooth out with a trowel. Take special care in feather-edging the material with the existing concrete surface.

Step #4:

To make sure your repaired area cures correctly, keep it moist with a fine mist from your garden hose, then cover with opaque plastic or burlap. Repeat this process 2-3 times a day for 3 days.

Suggested Uses:

Packaging & Yields:

One (1) pound covers approximately 1/2 sq. ft. 1/4" thick. A 40 lb. bag will cover approximately 18 sq. ft. 1/4" thick or 1/3 cu. ft. wet volume. Packaged in 5 and 10 lb. plastic pails and 40 lb. polylined bags.

Please Read The Warning On All Packaging