Anchoring Bolts and Railings |
Pakmix Anchor Cement is a specially formulated blend of cement and other ingredients that expands as it sets.
|
Tools Needed For Project: |
-
Pail for mixing
-
Trowel or putty knife
-
Brush for cleaning
|
|
|
|
Make a hole, where you want to put the bolt, at least 1" larger than the diameter of the bolt and at least 2 " deep. The area needs to be thoroughly cleaned and kept damp. Mix the Anchor Cement to a pourable consistency. Now hold your bolt in place and pour or trowel the cement in place. Using your trowel, force the cement around your bolt.
|
|
Suggested Uses:
-
Anchor bolts, hooks and railings
-
Set posts and poles
-
Seal around pipes and conduit
-
Level concrete before setting machines
|
|
|
Packaging & Yields:
One (1) pound fills approximately 17 cu. in. or will cover an area approximately one (1) sq. ft. 1/8" thick. Packaged in 5, 10, and 50 lb plastic pails.
|
|
Please Read The Warning On All Packaging |
